 	How do you mill a cove in a long workpiece without a shaper? How about jointing a square edge without a jointer? Both of these questions will be answered by Doug Hicks during this  seminar podcast. Doug will also show you how to add tapers using a jointer; rout  dovetails for dovetail keys on a router table; and even turn a spindle  with a router, portable hand drill and a special jig. Get the seminar guide here: 5 Surprising Woodworking Techniques

How do you mill a cove in a long workpiece without a shaper? How about jointing a square edge without a jointer? Both of these questions will be answered by Doug Hicks during this seminar podcast. Doug will also show you how to add tapers using a jointer; rout dovetails for dovetail keys on a router table; and even turn a spindle with a router, portable hand drill and a special jig. Get the seminar guide here: <a href="http://www.plansnow.com/seminars.html" rel="nofollow" target="_blank">5 Surprising Woodworking Techniques</a>

Podcast #44: 5 Surprising Woodworking Techniques You Didn’t Know About

 	This seminar isn’t about what you need — it’s more about what you don’t want to be without when you get started on a finishing project. All of them are items that you’ll find yourself reaching for regularly. And having them all on hand at the start of a project is the secret to a top-notch finish. Get the seminar guide here: 12 Must-Have Finishing Supplies

This seminar isn’t about what you need — it’s more about what you don’t want to be without when you get started on a finishing project. All of them are items that you’ll find yourself reaching for regularly. And having them all on hand at the start of a project is the secret to a top-notch finish. Get the seminar guide here: <a href="http://www.plansnow.com/seminars.html" rel="nofollow" target="_blank">12 Must-Have Finishing Supplies</a>

Podcast #43: 12 Must-Have Finishing Supplies

 	Watch demonstrations of three innovative joinery techniques: Miller Dowels, Beadlock Loose Tenon Joinery system, and Domino from Festool. Get the seminar guide here: 3 New Innovations in Joinery 

Watch demonstrations of three innovative joinery techniques: <a href="http://millerdowel.com/" rel="nofollow" target="_blank">Miller Dowels</a>, <a href="http://www.rockler.com/product.cfm?page=18088" rel="nofollow" target="_blank">Beadlock Loose Tenon Joinery</a> system, and Domino from <a href="http://www.festoolusa.com/products/domino-joining-system" rel="nofollow" target="_blank">Festool</a>. Get the seminar guide here: <a href="http://store.yahoo.com/cgi-bin/clink?plansnow+j3h3hE+seminars.html" rel="nofollow" target="_blank">3 New Innovations in Joinery </a>

Podcast #42: 3 New Innovations in Joinery

 	It’s hard to underestimate the importance of the table saw in the modern home workshop. It’s great for ripping, crosscutting, cutting sheet goods down to size, and it handles dadoes, rabbets, and grooves with ease. But what if it hasn’t been set up correctly? Then it’s just a big anchor in the middle of an unused shop. Vince Ancona takes us step-by-step through his routine for accurate set up and maintenance of a table saw. By the end of the seminar, you’ll have learned how to vastly improve the quality of the cuts you make with your table saw. Get the seminar guide here: Table Saw Set Up &amp; Maintenance

It’s hard to underestimate the importance of the table saw in the modern home workshop. It’s great for ripping, crosscutting, cutting sheet goods down to size, and it handles dadoes, rabbets, and grooves with ease. But what if it hasn’t been set up correctly? Then it’s just a big anchor in the middle of an unused shop. Vince Ancona takes us step-by-step through his routine for accurate set up and maintenance of a table saw. By the end of the seminar, you’ll have learned how to vastly improve the quality of the cuts you make with your table saw. Get the seminar guide here: <a href="http://store.yahoo.com/cgi-bin/clink?plansnow+j3h3hE+seminars.html" rel="nofollow" target="_blank">Table Saw Set Up &amp; Maintenance</a>

Podcast #41: Table Saw Set Up & Maintenance

 	I asked associate editor Randy Maxey why hand planes are an important part of a modern woodworking shop? Here is what he told me: “I know a lot of people think I use hand planes just because I’m old-fashioned. The truth is, I love my machines. But if you want to do quality work in your wood shop, you need to learn to use hand planes. I use at least one of the three planes I’m demonstrating almost every time I’m in the shop. It has changed the way I do woodworking. I really agree with a line I read once in an old, old issue of Woodsmith magazine. It said, ‘…no machine can come close to the quality of work a hand plane will do.’” Get the seminar guide here: Three Hand Planes Every Shop Should Have

I asked associate editor Randy Maxey why hand planes are an important part of a modern woodworking shop? Here is what he told me: “I know a lot of people think I use hand planes just because I’m old-fashioned. The truth is, I love my machines. But if you want to do quality work in your wood shop, you need to learn to use hand planes. I use at least one of the three planes I’m demonstrating almost every time I’m in the shop. It has changed the way I do woodworking. I really agree with a line I read once in an old, old issue of <a href="http://www.woodsmith.com/" rel="nofollow" target="_blank">Woodsmith</a> magazine. It said, ‘…no machine can come close to the quality of work a hand plane will do.’” Get the seminar guide here: <a href="http://store.yahoo.com/cgi-bin/clink?plansnow+j3h3hE+seminars.html+" rel="nofollow" target="_blank">Three Hand Planes Every Shop Should Have</a>

Podcast #40: Three Hand Planes Every Shop Should Have

 	Phil Huber, a senior editor for ShopNotes magazine details in this seminar all the steps necessary for building a sturdy set of drawers on a router table. First, he’ll demonstrate how to build drawers using a specialized drawer joint bit in just two simple steps. Then, for those of us who choose not to buy the special bit, Phil will take us through the steps of building drawers with an ordinary 1/4″-dia. straight bit. Get the Seminar Guide here: Building Drawers Using Drawer Joint Bits

Phil Huber, a senior editor for <a href="http://www.shopnotes.com/" rel="nofollow" target="_blank">ShopNotes</a> magazine details in this seminar all the steps necessary for building a sturdy set of drawers on a router table. First, he’ll demonstrate how to build drawers using a specialized drawer joint bit in just two simple steps. Then, for those of us who choose not to buy the special bit, Phil will take us through the steps of building drawers with an ordinary 1/4″-dia. straight bit. Get the Seminar Guide here: <a href="http://store.yahoo.com/cgi-bin/clink?plansnow+j3h3hE+seminars.html+" rel="nofollow" target="_blank">Building Drawers Using Drawer Joint Bits</a>

Podcast #39: Building Drawers Using Drawer Joint Bits

 	Ready for a kitchen remodel complete with all-new cabinets? Finally building that entertainment center? Or are you just wondering how to cut a sheet of plywood down to size on your table saw? Then this seminar is for you. There is no doubt that working with plywood can be a challenge. According to Dave Stone, a full sheet of 3/4″ hardwood plywood can weigh anywhere from 60 to 100 pounds. And the last thing you want to do is drop it on a corner or have excessive chip out when you cut a piece down to size. Check out the Woodsmith Podcast Store, or get the Seminar Guide here: Tips for Working with Plywood

Ready for a kitchen remodel complete with all-new cabinets? Finally building that entertainment center? Or are you just wondering how to cut a sheet of plywood down to size on your table saw? Then this seminar is for you. There is no doubt that working with plywood can be a challenge. According to Dave Stone, a full sheet of 3/4″ hardwood plywood can weigh anywhere from 60 to 100 pounds. And the last thing you want to do is drop it on a corner or have excessive chip out when you cut a piece down to size. Check out the <a href="http://www.woodworkingonline.com/woodsmith-podcast-store/" rel="nofollow" target="_blank">Woodsmith Podcast Store</a>, or get the Seminar Guide here: <a href="http://www.plansnow.com/seminars.html" rel="nofollow" target="_blank">Tips for Working with Plywood</a>

Podcast #38: Tips for Working with Plywood

 	Keeping your turning tools sharp — before, during, and after a turning session is extremely important. Brian Simmons prefers the Wolverine system from Oneway, using their grinding jig with the vari-grind attachment to put a fine edge on his turning tools. If you’ve seen earlier seminars presented by Brian, you know that he constantly uses his General 6″ bench grinder to sharpen his gouges, skews, scrapers and parting tools. Brian prefers this 1800rpm grinder and uses an 80-grit aluminum oxide stone for most applications. Be sure to check out the Woodsmith Podcast Store for a link to the Seminar Guide that Brian used during this seminar, plus a few sharpening accessories for sale.

Keeping your turning tools sharp — before, during, and after a turning session is extremely important. Brian Simmons prefers the Wolverine system from Oneway, using their grinding jig with the vari-grind attachment to put a fine edge on his turning tools. If you’ve seen earlier seminars presented by Brian, you know that he constantly uses his General 6″ bench grinder to sharpen his gouges, skews, scrapers and parting tools. Brian prefers this 1800rpm grinder and uses an 80-grit aluminum oxide stone for most applications. Be sure to check out the <a href="http://www.woodworkingonline.com/woodsmith-podcast-store/" rel="nofollow" target="_blank">Woodsmith Podcast Store</a> for a link to the Seminar Guide that Brian used during this seminar, plus a few sharpening accessories for sale.

Podcast #37: Turning Tools — Sharpen Your Skills with Sharp Tools

 	Robby Pedersen has spent almost 20 years teaching cabinetmaking to young people. His shop and showroom — RVP~1875 — in Story City is a destination stop for school children throughout central Iowa. Before starting his business making reproduction furniture, Robby ran the period cabinet shop at the Living History Farms in Clive, IA. During this seminar podcast, Robby will demonstrate cutting dovetails with the same tools and techniques used by pioneer craftsmen of the 1800s. You’ll find a link to the seminar guide, distributed at this seminar, for sale at the Woodsmith Podcast Store.

Robby Pedersen has spent almost 20 years teaching cabinetmaking to young people. His shop and showroom — <a href="http://www.rvp1875.com/" rel="nofollow" target="_blank">RVP~1875</a> — in Story City is a destination stop for school children throughout central Iowa. Before starting his business making reproduction furniture, Robby ran the period cabinet shop at the Living History Farms in Clive, IA. During this seminar podcast, Robby will demonstrate cutting dovetails with the same tools and techniques used by pioneer craftsmen of the 1800s. You’ll find a link to the seminar guide, distributed at this seminar, for sale at the <a href="http://www.woodworkingonline.com/woodsmith-podcast-store/" rel="nofollow" target="_blank">Woodsmith Podcast Store</a>.

Podcast #36: Hand-Cut Dovetails with Robby Pedersen

 	If you’ve checked out a copy of Woodsmith or ShopNotes in the last couple of years, you may have noticed that articles about hand planes and their use have been showing up a little more often. That’s mostly because we have an editor who takes an active interest in promoting their usage — Randy Maxey. Randy will spend an hour during this Woodsmith Woodworking Seminar Podcast to give us his tips for tuning up a hand plane, a very important procedure if you’ve ever tried to use one. As you may know, an out-of-tune plane, with a dull or nicked iron, can be a real pain to use. This seminar is for “users,” not “collectors.” Be sure to check out the Woodsmith Podcast Store for links to a few products that Randy used during this seminar. There are also links to Seminar Guide at PlansNow.com

If you’ve checked out a copy of <a href="http://www.woodsmith.com/" rel="nofollow" target="_blank">Woodsmith</a> or <a href="http://www.shopnotes.com/" rel="nofollow" target="_blank">ShopNotes</a> in the last couple of years, you may have noticed that articles about hand planes and their use have been showing up a little more often. That’s mostly because we have an editor who takes an active interest in promoting their usage — Randy Maxey. Randy will spend an hour during this Woodsmith Woodworking Seminar Podcast to give us his tips for tuning up a hand plane, a very important procedure if you’ve ever tried to use one. As you may know, an out-of-tune plane, with a dull or nicked iron, can be a real pain to use. This seminar is for “users,” not “collectors.” Be sure to check out the <a href="http://www.woodworkingonline.com/woodsmith-podcast-store/" rel="nofollow" target="_blank">Woodsmith Podcast Store</a> for links to a few products that Randy used during this seminar. There are also links to <a href="http://www.plansnow.com/seminars.html" rel="nofollow" target="_blank">Seminar Guide</a> at <a href="http://www.plansnow.com/" rel="nofollow" target="_blank">PlansNow.com</a>

Podcast #35: Tuning a Hand Plane for Performance

An online source of information for the connected woodworker.

Nice

These videos are very informative!!  I wish they didn&#39;t stop posting them!!  Please post some more!!

Love the videos...why did they stop?

Podcast – Woodworking Online

 	There are two basic methods for making a cabinet. Face-frame construction creates a more traditional look. What’s often called “European-style” (or frameless) construction offers a sleeker and more contemporary look. In this seminar, Doug Hicks and Joel Hess compare and contrast these two styles of construction. They also address the different types of materials and hardware used.

There are two basic methods for making a cabinet. Face-frame construction creates a more traditional look. What’s often called “European-style” (or frameless) construction offers a sleeker and more contemporary look. In this seminar, Doug Hicks and Joel Hess compare and contrast these two styles of construction. They also address the different types of materials and hardware used.

Podcast #9: Cabinetmaking 101

 	Whether you’re setting up shop for the first time or looking for more space in an existing shop, you’ll get some valuable tips from this seminar. Jim Downing doesn’t just show you how to arrange your tools. That’s going to be different for every person and every space. He also explains the strategies for getting the most efficient use of whatever space you have. Learn about things like maintaining zones for handling materials, leaving room for assembly work and how to double up equipment to save space. Toward the end of the seminar, Jim uses some resources on the Workbench magazine web site, including an interactive shop planner. Using this, you can set up a space the same size as your shop, then move tools around to customize your shop’s layout. You can also watch a video of Workbench’s space-saving shop and download the accompanying article. The guide for this seminar is now available for download. It’s a 10-page pdf and the cost to you is $2.95. You can download it by clicking here.

Whether you’re setting up shop for the first time or looking for more space in an existing shop, you’ll get some valuable tips from this seminar. Jim Downing doesn’t just show you how to arrange your tools. That’s going to be different for every person and every space. He also explains the strategies for getting the most efficient use of whatever space you have. Learn about things like maintaining zones for handling materials, leaving room for assembly work and how to double up equipment to save space. Toward the end of the seminar, Jim uses some resources on the <a href="http://www.workbenchmagazine.com" rel="nofollow" target="_blank">Workbench</a> magazine web site, including an <a href="http://workbenchmagazine.com/main/wb288-bbasics02.html" rel="nofollow" target="_blank">interactive shop planner</a>. Using this, you can set up a space the same size as your shop, then move tools around to customize your shop’s layout. You can also watch a video of Workbench’s <a href="http://workbenchmagazine.com/main/wb297-onlineextras.html" rel="nofollow" target="_blank">space-saving shop</a> and download the <a href="http://workbenchmagazine.com/main/wb297-homeshop01.html" rel="nofollow" target="_blank">accompanying article</a>. The guide for this seminar is now available for download. It’s a 10-page pdf and the cost to you is $2.95. You can download it by clicking <a href="http://plansnow.com/dn8004.html" rel="nofollow" target="_blank">here</a>.

Podcast #10: Tips for Setting Up a Great Home Shop

 	If there is one power tool that lends itself perfectly to accessories it’s the table saw. Things like push sticks and stop blocks can make using a table saw more efficient and safe. And, auxiliary fences for the miter gauge and the rip fence prevent chip out and protect the factory fence from being damaged. Best of all, each of these accessories can easily be made in the shop. This week’s Woodsmith Woodworking Seminar focuses on seven accessories that are “must-haves.” You’ll find a few pieces of hardware, that can be used for building jigs, for sale at the Woodsmith Podcast Store, plus a link to the seminar guide.

If there is one power tool that lends itself perfectly to accessories it’s the table saw. Things like push sticks and stop blocks can make using a table saw more efficient and safe. And, auxiliary fences for the miter gauge and the rip fence prevent chip out and protect the factory fence from being damaged. Best of all, each of these accessories can easily be made in the shop. This week’s <a href="http://www.woodsmith.com/" rel="nofollow" target="_blank">Woodsmith</a> Woodworking Seminar focuses on seven accessories that are “must-haves.” You’ll find a few pieces of hardware, that can be used for building jigs, for sale at the <a href="http://www.woodworkingonline.com/woodsmith-podcast-store/" rel="nofollow" target="_blank">Woodsmith Podcast Store</a>, plus a link to the seminar guide.

Podcast #34: 7 Must-Have Shop-Built Table Saw Accessories

 	Doug Hicks doesn’t just go through the motions when he presents a seminar. With all his years of woodworking and teaching experience, he really provides a wealth of knowledge and know-how. During this seminar podcast, Doug will explain why a router table makes a router even more versatile. His tips for buying or building a router table are well-researched and insightful.  And he’ll present some special techniques and tips to make your work on a router table easier, safer, and more accurate. Be sure to check out the Woodsmith Podcast Store for links to a few products that Doug used during his seminar.

Doug Hicks doesn’t just go through the motions when he presents a seminar. With all his years of woodworking and teaching experience, he really provides a wealth of knowledge and know-how. During this seminar podcast, Doug will explain why a router table makes a router even more versatile. His tips for buying or building a router table are well-researched and insightful. And he’ll present some special techniques and tips to make your work on a router table easier, safer, and more accurate. Be sure to check out the <a href="http://www.woodworkingonline.com/woodsmith-podcast-store/" rel="nofollow" target="_blank">Woodsmith Podcast Store</a> for links to a few products that Doug used during his seminar.

Podcast #32: Router Table Tips, Tricks, & Techniques

 	Is the jointer fence square to the table? How long has it been since the knives in the thickness planer have been sharpened? How about the table saw, is it due for a tune up? You’ll need all three of these tools (or their hand tool equivalents) in good working order, if you want to end up with a perfect workpiece. Bryan Nelson shows us how to square up lumber during this Woodsmith Woodworking Seminar podcast. When you’re done watching, be sure to check out the Woodsmith Podcast Store. You’ll find links to project plans, the seminar guide, and a few of the tools and accessories that Bryan used during the seminar.

Is the jointer fence square to the table? How long has it been since the knives in the thickness planer have been sharpened? How about the table saw, is it due for a tune up? You’ll need all three of these tools (or their hand tool equivalents) in good working order, if you want to end up with a perfect workpiece. Bryan Nelson shows us how to square up lumber during this <a href="http://www.woodsmith.com" rel="nofollow" target="_blank">Woodsmith</a> Woodworking Seminar podcast. When you’re done watching, be sure to check out the <a href="http://www.woodworkingonline.com/woodsmith-podcast-store/" rel="nofollow" target="_blank">Woodsmith Podcast Store</a>. You’ll find links to project plans, the seminar guide, and a few of the tools and accessories that Bryan used during the seminar.

Podcast #17: 7 Steps to a Perfect Workpiece: Squaring Up Lumber

 	When it comes right down to it, most cabinets are just boxes made out of plywood. Add a drawer and a slab door and you’ve got utilitarian storage for a garage or workshop. But if you’re building cabinets for your kitchen or bath, chances are you’ll want something sturdy that also looks good. That’s when you’ll want to build a door using frame and raised panel construction. So get out the router table, during this week’s Woodsmith Woodworking Seminar podcast, Joel Hess shows you how to build a frame and raised panel door using three highly specialized router bits. After the podcast is finished, stop by the Woodsmith Podcast Store.  You’ll find links to project plans, the seminar guide, and a few of the tools and accessories that Joel used during the seminar.

When it comes right down to it, most cabinets are just boxes made out of plywood. Add a drawer and a slab door and you’ve got utilitarian storage for a garage or workshop. But if you’re building cabinets for your kitchen or bath, chances are you’ll want something sturdy that also looks good. That’s when you’ll want to build a door using frame and raised panel construction. So get out the router table, during this week’s Woodsmith Woodworking Seminar podcast, Joel Hess shows you how to build a frame and raised panel door using three highly specialized router bits. After the podcast is finished, stop by the <a href="http://www.woodworkingonline.com/woodsmith-podcast-store/" rel="nofollow" target="_blank">Woodsmith Podcast Store</a>. You’ll find links to project plans, the seminar guide, and a few of the tools and accessories that Joel used during the seminar.

Podcast #18: Frames & Panels: The Heart of Cabinetmaking

 	Some woodworkers consider a band saw the most useful tool in a woodworking shop. You’ll learn why Doug Hicks feels this way during this week’s Woodsmith Woodworking Seminar Podcast. During this podcast, you’ll get some tips for buying a band saw and blades. Plus, you’ll learn how to properly set up a band saw and a few techniques you can perform with this versatile machine. If you’re interested in picking up a downloadable copy of the seminar guide (in case you want to follow along during the podcast), be sure to check out the Woodsmith Podcast Store. Also this week at the store, you’ll find a link to some good deals on a few band saw upgrades that Doug mentioned during his seminar. And as always, all of the great information provided during the seminars comes right from the pages of Woodsmith magazine. If you like what you see in the podcasts, click here for a free preview issue of the magazine.

Some woodworkers consider a band saw the most useful tool in a woodworking shop. You’ll learn why Doug Hicks feels this way during this week’s <a href="http://www.woodsmith.com" rel="nofollow" target="_blank">Woodsmith</a><a href="http://www.woodsmith.com" rel="nofollow" target="_blank"> Woodworking Seminar Podcast</a>. During this podcast, you’ll get some tips for buying a band saw and blades. Plus, you’ll learn how to properly set up a band saw and a few techniques you can perform with this versatile machine. If you’re interested in picking up a downloadable copy of the seminar guide (in case you want to follow along during the podcast), be sure to check out the <a href="http://www.woodworkingonline.com/woodsmith-podcast-store/" rel="nofollow" target="_blank">Woodsmith Podcast Store</a>. Also this week at the store, you’ll find a link to some good deals on a few band saw upgrades that Doug mentioned during his seminar. And as always, all of the great information provided during the seminars comes right from the pages of Woodsmith magazine. If you like what you see in the podcasts, click <a href="https://w1.buysub.com/pubs/WS/WSM/WSM_free-preview.jsp?cds_page_id=13126&amp;cds_mag_code=WSM&amp;id=1181307447287&amp;lsid=71590753590020712&amp;vid=2&amp;cds_mag_code=WSM" rel="nofollow" target="_blank">here</a> for a free preview issue of the magazine.

Podcast #22: Buying & Getting the Most Out of Your Band Saw

 During this week’s Woodsmith Woodworking Seminar podcast — Router Inlays: Adding Decorative Details — Dennis Perkins, an assistant editor for Woodsmith and ShopNotes magazines, will show us how to use a router inlay kit. During the seminar, he uses a router fitted with a simple kit that includes a bushing, a removable sleeve, and a down-cut spiral bit (click thumbnail at left). He also used his own home-made template. With the kit, he can rout out both the inlay and the matching recess using only one template. Note: The router inlay kits (Rockler #83642) are available from The Woodsmith Store. Call 800-835-5084 to order. Mention this online coupon code: Seminars to receive free freight. Another way to add inlay to a project is to use color-tinted epoxy. During the seminar, Dennis demonstrates an easy way to do it. Woodsmith magazine also used the process to add a decorative detail to an end table project that was featured in the magazine. During the seminars, the presenters often mention a seminar guide or handout. The guide is now available for download in .pdf form from PlansNow.com. If you’d like to follow along during this week’s seminar, you can purchase the guide for only $4.95. The 12-page guide includes a two-page article from Woodsmith No. 166: “Using a Router Inlay Kit.” There’s also the six-page project plan: “Curved-Leg End Table.” It’s a Designer Series article from Woodsmith No. 168 (mentioned above). In addition to the project plan, there’s also a two-page technique article: “Adding An Epoxy Inlay,” and a one-page article on how to build a router trammel: “Router Trammel Jig.”

<a href="http://www.woodworkingonline.com/?attachment_id=652" rel="attachment nofollow" target="_blank"></a><a href="http://www.woodworkingonline.com/2007/03/05/podcast-14-router-inlays/13_mar5_inlaykit-copyjpg/" rel="attachment nofollow" target="_blank"></a>During this week’s <a href="http://www.woodsmith.com" rel="nofollow" target="_blank">Woodsmith</a> Woodworking Seminar podcast — Router Inlays: Adding Decorative Details — Dennis Perkins, an assistant editor for <a href="http://www.woodsmith.com/" rel="nofollow" target="_blank">Woodsmith</a> and <a href="http://www.shopnotes.com/" rel="nofollow" target="_blank">ShopNotes</a> magazines, will show us how to use a router inlay kit. During the seminar, he uses a router fitted with a simple kit that includes a bushing, a removable sleeve, and a down-cut spiral bit (click thumbnail at left). He also used his own home-made template. With the kit, he can rout out both the inlay and the matching recess using only one template. Note: The router inlay kits (Rockler #83642) are available from <a href="http://www.woodsmithstorespecials.com" rel="nofollow" target="_blank">The Woodsmith Store</a>. Call 800-835-5084 to order. Mention this online coupon code: Seminars to receive free freight. Another way to add inlay to a project is to use color-tinted epoxy. During the seminar, Dennis demonstrates an easy way to do it. Woodsmith magazine also used the process to add a decorative detail to an end table project that was featured in the magazine. During the seminars, the presenters often mention a seminar guide or handout. The guide is now available for download in .pdf form from <a href="http://plansnow.com/seminars.html" rel="nofollow" target="_blank">PlansNow.com</a>. If you’d like to follow along during this week’s seminar, you can purchase the guide for only $4.95. The 12-page guide includes a two-page article from Woodsmith No. 166: “Using a Router Inlay Kit.” There’s also the six-page project plan: “Curved-Leg End Table.” It’s a Designer Series article from Woodsmith No. 168 (mentioned above). In addition to the project plan, there’s also a two-page technique article: “Adding An Epoxy Inlay,” and a one-page article on how to build a router trammel: “Router Trammel Jig.”

Podcast #14: Router Inlays

 	I have a half dozen different squares in my shop. My framing square isn’t accurate enough for fine woodworking. A good try square is plenty accurate, but its uses are limited. The combination square, on the other hand, is one of the most versatile layout and measuring tools in my shop. That’s why it tops the list of my “10 Essential Hand Tools for Your Shop.” If you’re interested in purchasing any of the items I mention in this Woodsmith Woodworking Podcast, be sure to check out the Woodsmith Podcast Store. You’ll find links to many of the items listed there.

I have a half dozen different squares in my shop. My framing square isn’t accurate enough for fine woodworking. A good try square is plenty accurate, but its uses are limited. The combination square, on the other hand, is one of the most versatile layout and measuring tools in my shop. That’s why it tops the list of my “10 Essential Hand Tools for Your Shop.” If you’re interested in purchasing any of the items I mention in this <a href="http://www.woodsmith.com" rel="nofollow" target="_blank">Woodsmith</a> Woodworking Podcast, be sure to check out the <a href="http://www.woodworkingonline.com/woodsmith-podcast-store/" rel="nofollow" target="_blank">Woodsmith Podcast Store</a>. You’ll find links to many of the items listed there.

Podcast #27: 10 Essential Hand Tools for Your Shop

 	Tapering, pattern cutting, coves, kerf bending, and raised panels. Those are just 5 of the things you may not have realized you could do with your table saw. During the Woodsmith Woodworking Seminar podcast, Ted Raife, associate editor for Woodsmith and ShopNotes, gives us safe, fast, and efficient tips on completing all five techniques. Be sure to check out the Woodsmith Podcast Store. If you’re interested in picking up a downloadable copy of the seminar guide, so you can follow along during the podcast, you’ll find it there. Plus, there’s a link to a good deal on the Forrest Woodworker II Premium table saw blade that Ted used during the seminar.

Tapering, pattern cutting, coves, kerf bending, and raised panels. Those are just 5 of the things you may not have realized you could do with your table saw. During the <a href="http://www.woodsmith.com" rel="nofollow" target="_blank">Woodsmith</a> Woodworking Seminar podcast, Ted Raife, associate editor for <a href="http://www.woodsmith.com" rel="nofollow" target="_blank">Woodsmith</a> and <a href="http://www.shopnotes.com" rel="nofollow" target="_blank">ShopNotes</a>, gives us safe, fast, and efficient tips on completing all five techniques. Be sure to check out the <a href="http://www.woodworkingonline.com/woodsmith-podcast-store/" rel="nofollow" target="_blank">Woodsmith Podcast Store</a>. If you’re interested in picking up a downloadable copy of the seminar guide, so you can follow along during the podcast, you’ll find it there. Plus, there’s a link to a good deal on the Forrest Woodworker II Premium table saw blade that Ted used during the seminar.

Podcast #21: 5 Things You Didn’t Know You Could Do with Your Table Saw

 	The challenge is this — build an elegant accent table with curved stretchers. Would you use bent laminations to make the stretchers? Or is steam bending the answer? Chris Fitch will demonstrate both during this week’s Woodsmith Seminar Podcast. During the seminar, Chris talks about a couple of projects that feature curved pieces made from bent laminations. Both of the projects were taken from recent issues of Woodsmith magazine. If you’d like to subscribe to Woodsmith, or simply purchase plans for these projects, click here: Woodsmith Podcast Store. You’ll also find a link to the seminar guide provided during the seminar and a great article on choosing the right glue for your projects.

The challenge is this — build an elegant accent table with curved stretchers. Would you use bent laminations to make the stretchers? Or is steam bending the answer? Chris Fitch will demonstrate both during this week’s <a href="http://www.woodsmith.com" rel="nofollow" target="_blank">Woodsmith</a> Seminar Podcast. During the seminar, Chris talks about a couple of projects that feature curved pieces made from bent laminations. Both of the projects were taken from recent issues of Woodsmith magazine. If you’d like to subscribe to Woodsmith, or simply purchase plans for these projects, click here: <a href="http://www.woodworkingonline.com/woodsmith-podcast-store/" rel="nofollow" target="_blank">Woodsmith Podcast Store</a>. You’ll also find a link to the seminar guide provided during the seminar and a great article on choosing the right glue for your projects.

Podcast #16: Bending Wood: 2 Methods to Creating Curves

 	Pocket holes are one of the simplest forms of joinery in all of woodworking. All you need is a pocket hole jig to drill the holes and some special pocket hole screws to connect two pieces together. They’re great for avoiding problems with laying out your workpieces and with alignment. Plus, they eliminate the need to clamp up a lot of pieces during glue up. During this week’s podcast, Phil Huber will show you some tricks for using pocket screws and he’ll build a complete patio table using pocket screw joinery. As usual, all of the links to articles, seminar guides, and products that you’ll see being used during the seminar podcast can be found at the Woodsmith Podcast Store. They include a link to the seminar guide, a couple of great project articles from Woodsmith magazine that feature pocket hole joinery, and several great Kreg Tool Co. products for sale. Be sure to check it out by clicking on this link: Woodsmith Podcast Store

Pocket holes are one of the simplest forms of joinery in all of woodworking. All you need is a pocket hole jig to drill the holes and some special pocket hole screws to connect two pieces together. They’re great for avoiding problems with laying out your workpieces and with alignment. Plus, they eliminate the need to clamp up a lot of pieces during glue up. During this week’s podcast, Phil Huber will show you some tricks for using pocket screws and he’ll build a complete patio table using pocket screw joinery. As usual, all of the links to articles, seminar guides, and products that you’ll see being used during the seminar podcast can be found at the <a href="http://www.woodworkingonline.com/woodsmith-podcast-store/" rel="nofollow" target="_blank">Woodsmith Podcast Store</a>. They include a link to the <a href="http://www.plansnow.com/seminars.html" rel="nofollow" target="_blank">seminar guide</a>, a couple of great project articles from <a href="http://www.woodsmith.com" rel="nofollow" target="_blank">Woodsmith</a> magazine that feature pocket hole joinery, and several great <a href="http://www.kregtool.com" rel="nofollow" target="_blank">Kreg Tool Co.</a> products for sale. Be sure to check it out by clicking on this link: <a href="http://www.woodworkingonline.com/woodsmith-podcast-store/" rel="nofollow" target="_blank">Woodsmith Podcast Store</a>

Podcast #23: Pocket Hole Joinery: Simple & Strong Cabinetmaking

During this week’s Woodsmith Woodworking Seminar podcast, you’ll get to see a great new fixture that’s featured in ShopNotes Issue No. 93. Bryan Nelson (who is managing editor of ShopNotes magazine) will be routing machine-cut dovetails using the Porter-Cable 4212 dovetail jig. And to make it even more interesting, he uses the new Dovetail Jig Workcenter. The workcenter is loaded with features that provide storage for the jig and all its accessories, imporved accuracy, and added comfort as you work. Once again, the jig is featured in the lastest issue of ShopNotes (on newsstands now). After the podcast is finished, stop by the Woodsmith Podcast Store.  You’ll find links to project plans, the seminar guide, and a few of the tools and accessories that Bryan used during the seminar.

During this week’s <a href="http://www.woodsmith.com" rel="nofollow" target="_blank">Woodsmith</a> Woodworking Seminar podcast, you’ll get to see a great new fixture that’s featured in <a href="http://www.shopnotes.com" rel="nofollow" target="_blank">ShopNotes</a> Issue No. 93. Bryan Nelson (who is managing editor of ShopNotes magazine) will be routing machine-cut dovetails using the <a href="http://www.portercable.com/index.asp?e=547&amp;p=5839" rel="nofollow" target="_blank">Porter-Cable 4212 dovetail jig</a>. And to make it even more interesting, he uses the new <a href="http://www.woodworkingonline.com/2007/04/02/inside-shopnotes-no-93/" rel="nofollow" target="_blank">Dovetail Jig Workcenter</a>. The workcenter is loaded with features that provide storage for the jig and all its accessories, imporved accuracy, and added comfort as you work. Once again, the jig is featured in the lastest issue of ShopNotes (on newsstands now). After the podcast is finished, stop by the <a href="http://www.woodworkingonline.com/woodsmith-podcast-store/" rel="nofollow" target="_blank">Woodsmith Podcast Store</a>. You’ll find links to project plans, the seminar guide, and a few of the tools and accessories that Bryan used during the seminar.

Podcast #20: Machine-Cut Dovetails

 	If there is one thing that really sets apart a beautiful set of cabinets or a fine piece of furniture from work that’s just plain Jane — it’s the panels. We’ve all seen the inexpensive cabinets at the big box stores. Yuck! The door panels usually have one board with wild grain going every which way right next to a board with grain straight as an arrow! It just doesn’t look right. That’s why Craig Ruegsegger has gone to a lot of trouble to show us how to make eye-catching panels during this week’s Woodsmith Woodworking Seminar podcast. His seminar takes into account arranging boards for grain pattern, preparing the boards so they’re flat, straight and square, plus glue-up and clamping techniques. A 15-page seminar guide, just like the one used during the seminar podcast is available for immediate download at PlansNow. It’s priced at $4.95 and includes several great acticles on making panels. Seminar Guide: Secrets to Making Perfect Panels

If there is one thing that really sets apart a beautiful set of cabinets or a fine piece of furniture from work that’s just plain Jane — it’s the panels. We’ve all seen the inexpensive cabinets at the big box stores. Yuck! The door panels usually have one board with wild grain going every which way right next to a board with grain straight as an arrow! It just doesn’t look right. That’s why Craig Ruegsegger has gone to a lot of trouble to show us how to make eye-catching panels during this week’s <a href="http://www.woodsmith.com" rel="nofollow" target="_blank">Woodsmith</a> Woodworking Seminar podcast. His seminar takes into account arranging boards for grain pattern, preparing the boards so they’re flat, straight and square, plus glue-up and clamping techniques. A 15-page <a href="http://www.plansnow.com/seminars.html" rel="nofollow" target="_blank">seminar guide</a>, just like the one used during the seminar podcast is available for immediate download at <a href="http://www.plansnow.com" rel="nofollow" target="_blank">PlansNow</a>. It’s priced at $4.95 and includes several great acticles on making panels. <a href="http://www.plansnow.com/seminars.html" rel="nofollow" target="_blank">Seminar Guide: Secrets to Making Perfect Panels</a>

Podcast #15: Secrets to Making Perfect Panels

 	Jig plans for cutting circles, adjustable dadoes, and a flush trim jig are included in this week’s Woodsmith Woodworking Seminar Podcast. Bryan Nelson will also give the low down on how to build a hinge mortising jig and a unique router table sled that holds narrow workpieces firmly while routing across end grain. Check out the Woodsmith Podcast Store for more deals on router bits and the seminar guide.

Jig plans for cutting circles, adjustable dadoes, and a flush trim jig are included in this week’s <a href="http://www.woodsmith.com" rel="nofollow" target="_blank">Woodsmith</a> Woodworking Seminar Podcast. Bryan Nelson will also give the low down on how to build a hinge mortising jig and a unique router table sled that holds narrow workpieces firmly while routing across end grain. Check out the <a href="http://www.woodworkingonline.com/woodsmith-podcast-store/" rel="nofollow" target="_blank">Woodsmith Podcast Store</a> for more deals on router bits and the seminar guide.

Podcast #29: Top 5 Shop-Built Router Jigs

 	How many times have you overheard somebody make this comment? “Finishing is my least favorite part of woodworking. It’s so hard to figure out the difference between BLO and Danish oil and Teak oil, and all the other brands of varnishes and oils available.” I’ve been woodworking for years and I totally agreed with the comment. But it doesn’t have to be such a mystery. Doug Hicks has a clear and concise way of explaining it all during this weeks Woodsmith Woodworking Seminar Podcast. Instead of “…apply two coats and let dry,” his directions for finishing with varnishes and oils will make everything crystal clear. You’ll want to pick up the Seminar Guide at the Woodsmith Podcast Store. It’s full of great information on oils and varnishes.

How many times have you overheard somebody make this comment? “Finishing is my least favorite part of woodworking. It’s so hard to figure out the difference between BLO and Danish oil and Teak oil, and all the other brands of varnishes and oils available.” I’ve been woodworking for years and I totally agreed with the comment. But it doesn’t have to be such a mystery. Doug Hicks has a clear and concise way of explaining it all during this weeks <a href="http://www.woodsmith.com" rel="nofollow" target="_blank">Woodsmith</a> Woodworking Seminar Podcast. Instead of “…apply two coats and let dry,” his directions for finishing with varnishes and oils will make everything crystal clear. You’ll want to pick up the <a href="http://www.plansnow.com/seminars.html" rel="nofollow" target="_blank">Seminar Guide</a> at the <a href="http://www.woodworkingonline.com/woodsmith-podcast-store/" rel="nofollow" target="_blank">Woodsmith Podcast Store</a>. It’s full of great information on oils and varnishes.

Podcast #28: Oils and Varnishes

 	Great looking projects don’t just happen — they’re made. It takes a lot of time and effort to come up with the best looking lumber to create a project that really stands out. Dennis starts the seminar by discussing the differences between “hardwood” lumber and the stuff you’ll find on the racks at the lumber yard. Then he talks about board footage, grades, surfacing, moisture content, and finally, how to choose the best parts from a board for a particular project. During the seminar, Dennis keeps reaching for a tape measure. The one he used is available at the Woodsmith Podcast Store, along with a few other items he uses to make selecting lumber easier.

Great looking projects don’t just happen — they’re made. It takes a lot of time and effort to come up with the best looking lumber to create a project that really stands out. Dennis starts the seminar by discussing the differences between “hardwood” lumber and the stuff you’ll find on the racks at the lumber yard. Then he talks about board footage, grades, surfacing, moisture content, and finally, how to choose the best parts from a board for a particular project. During the seminar, Dennis keeps reaching for a tape measure. The one he used is available at the <a href="http://www.woodworkingonline.com/woodsmith-podcast-store/" rel="nofollow" target="_blank">Woodsmith Podcast Store</a>, along with a few other items he uses to make selecting lumber easier.

Podcast #31: Selecting Lumber for Great-Looking Projects

Bringing home and setting up a new tool, especially one that gets used as often as the table saw, provides the average woodworker with several opportunities to CYOM. Don’t know what CYOM means? Well, let’s just say that we’ve all done it at one time or another. Since few stationary power tools are shipped completely set up and ready to use right out of the crate, the first thing you’re likely to do is CYOM — “Consult Your Owner’s Manual.” The owner’s manual will help you with several things, like removing backlash from the raising and tilt mechanisms and adjusting the trunnion. But there are lots of tune up tips that are left to the imagination (or aren’t required until after you’ve used the saw for several weeks). That’s where Craig Ruegsegger can help. He’s put together quite a few quick and simple tune up techniques that will vastly improve the quality of the cuts you’ll make with your table saw. These tips and techniques are the subject of this weeks Woodsmith Woodworking Seminar Podcast: Tuning Up Your Table Saw for Perfect Cuts. During the seminar, Craig makes a few references to the seminar guide or handout. This guide is full of great information, including a couple of articles from ShopNotes magazine. The cost is only $4.95 and the 9-page guide can be downloaded and printed right from your computer.

Bringing home and setting up a new tool, especially one that gets used as often as the table saw, provides the average woodworker with several opportunities to CYOM. Don’t know what CYOM means? Well, let’s just say that we’ve all done it at one time or another. Since few stationary power tools are shipped completely set up and ready to use right out of the crate, the first thing you’re likely to do is CYOM — “Consult Your Owner’s Manual.” The owner’s manual will help you with several things, like removing backlash from the raising and tilt mechanisms and adjusting the trunnion. But there are lots of tune up tips that are left to the imagination (or aren’t required until after you’ve used the saw for several weeks). That’s where Craig Ruegsegger can help. He’s put together quite a few quick and simple tune up techniques that will vastly improve the quality of the cuts you’ll make with your table saw. These tips and techniques are the subject of this weeks <a href="http://www.woodsmith.com" rel="nofollow" target="_blank">Woodsmith</a> Woodworking Seminar Podcast: Tuning Up Your Table Saw for Perfect Cuts. During the seminar, Craig makes a few references to the <a href="http://plansnow.com/seminars.html" rel="nofollow" target="_blank">seminar guide</a> or handout. This guide is full of great information, including a couple of articles from <a href="http://www.shopnotes.com" rel="nofollow" target="_blank">ShopNotes</a> magazine. The cost is only $4.95 and the 9-page guide can be downloaded and printed right from your computer.

Podcast #11: Tuning Up Your Table Saw for Perfect Cuts

The best self improvement podcast episodes. From improving productivity, to finding purpose in your life to what constitutes freedom, this topic is on anything and everything that can help people to improve their lives. Add episodes you're interested into your queue below!

Best Episodes on Self Improvement, Growth & Development

The best podcast episodes on physical health. Episodes talk about your diet, sleep, exercise and all the things that people do to improve their physical health and live a healthier life. This topic is for everyone, with applications in all of our everyday lives. Add episodes you're interested into your queue below!