David McColl's guest appearances

David McColl

Rotary Wing Show - Interviews from the Helicopter Industry 

Chris Ryan

Mark Jones

Dan Wells

Robert Mason

Matt Johnson

Matthew Barker

Dennis Kenyon

Robert Mills

Larry Thimmesch

Skip Tackett

Kimberly Hutchings

Richard Butterworth

Bernie Walker

Mark Weeden

Gareth Ross

OwlTail

David McColl is Chief Pilot of Rotor Blade LLC and has flown a range of powerline industry roles using the MD500 helicopter. The general line thrown out there is that most helicopter pilots try to spend their careers staying away from wires – the guys and girls flying in the powerline industry get right up close as part of their job. David McColl is a powerline pilot in the US and has built up experience in a number of the different types of operations that helicopters perform on the powerlines.   David switched careers from a ground soldier in the UK and as a security contractor across to helicopters – his first experience was in the back of a Chinook and figured this flying gig looked pretty good.  He trained on the H269 in Florida and after some hard work put into networking and going out to talk to companies resulted in a lucky break and two different job offers immediately on finishing training. David shares some advice on how to make your own luck around this too. “It usually takes at least a year if I’ll time training to get from private to CFI. I did it in 9 months and then immediately started flying pipeline patrol.”  I treated flight school like a full-time job and I had some great instructors and encouragement from family and friends. “I transitioned into the MD500 and Bell 206 very quickly in my career. It was a trial by fire. My MD500 training consisted of a 42 min flight. I had to make the best of it through YouTube videos, other pilots and reading up in the RFM.”  “I had an engine flame out in my first 7 hours which was my fault for not having my anti ice on and flying in snow. My engine flamed out about 8 ft above the ground while I was in the hover at an airport, the training kicked in and I carried out a hover auto, it was a non-event for the helicopter. Once on the ground the re-igniter kicked in and relit the engine. I have my initial instructor and my CFI instructor to thank for that.”    Human External Cargo (HEC) is used in the powerline industry to position lineworkers close to wires. Alternatively a special platform is fitted to the helicopter that the lineworker sits on the end of.   Like any specialised field once you dig into it there are all kinds of nuanced operations. A helicopter licence is only just the ticket to get in the door.  In this episode David walks us through powerline patrolling, LIDAR, insulator washing, marker ball placement, human external carriage (HEC), tower transfer, platform work, construction and stringing tasks.   Podcast: Subscribe in iTunes | Play in new window | Download Links from this week’s episode:Support the podcast on PatreonRotor Blade LLC – The helicopter utility company that David is chief pilot at.     This shot of David shows some of the modifications to the MD500 for powerline work. The large blue strap is the belly band used for Human External Cargo operations.    Washing the insulator discs with de-ionised water to remove dirt build up. The helicopter has to come over the wires for the spray boom to reach the inside set.      There are lots of videos on YouTube showing close up some of the operations we’ve talked about in this episode. Note the wire strand under the helicopter in this position. No pressure!     Do you have a question for David or tips from your own experience? Be part of the conversation by leaving a comment below.   The post RWS 91 – Helicopter Powerline Operations with David McColl appeared first on The Rotary Wing Show Podcast.

David McColl is Chief Pilot of Rotor Blade LLC and has flown a range of powerline industry roles using the MD500 helicopter. The general line thrown out there is that most helicopter pilots try to spend their careers staying away from wires – the guys and girls flying in the powerline industry get right up close as part of their job. David McColl is a powerline pilot in the US and has built up experience in a number of the different types of operations that helicopters perform on the powerlines.   David switched careers from a ground soldier in the UK and as a security contractor across to helicopters – his first experience was in the back of a Chinook and figured this flying gig looked pretty good.  He trained on the H269 in Florida and after some hard work put into networking and going out to talk to companies resulted in a lucky break and two different job offers immediately on finishing training. David shares some advice on how to make your own luck around this too. “It usually takes at least a year if I’ll time training to get from private to CFI. I did it in 9 months and then immediately started flying pipeline patrol.” <blockquote>I treated flight school like a full-time job and I had some great instructors and encouragement from family and friends.</blockquote> “I transitioned into the MD500 and Bell 206 very quickly in my career. It was a trial by fire. My MD500 training consisted of a 42 min flight. I had to make the best of it through YouTube videos, other pilots and reading up in the RFM.” “I had an engine flame out in my first 7 hours which was my fault for not having my anti ice on and flying in snow. My engine flamed out about 8 ft above the ground while I was in the hover at an airport, the training kicked in and I carried out a hover auto, it was a non-event for the helicopter. Once on the ground the re-igniter kicked in and relit the engine. I have my initial instructor and my CFI instructor to thank for that.” Human External Cargo (HEC) is used in the powerline industry to position lineworkers close to wires. Alternatively a special platform is fitted to the helicopter that the lineworker sits on the end of. Like any specialised field once you dig into it there are all kinds of nuanced operations. A helicopter licence is only just the ticket to get in the door.  In this episode David walks us through powerline patrolling, LIDAR, insulator washing, marker ball placement, human external carriage (HEC), tower transfer, platform work, construction and stringing tasks.  Podcast: <a href="https://itunes.apple.com/ph/podcast/rotary-wing-show-interviews/id903691746?mt=2" rel="noreferrer noopener nofollow" target="_blank">Subscribe in iTunes</a> | <a href="http://media.blubrry.com/rotarywingshow/p/s3.amazonaws.com/rotarywingshow/RWS90-efbs-andy-boniface.mp3" rel="noreferrer noopener nofollow" target="_blank">Play in new window</a> | <a href="http://media.blubrry.com/rotarywingshow/p/s3.amazonaws.com/rotarywingshow/RWS91-powerlines-david-mccoll.mp3" rel="nofollow" target="_blank">Download</a> Links from this week’s episode: <a href="https://www.patreon.com/rotarywingshow" rel="noreferrer noopener nofollow" target="_blank">Support the podcast on Patreon</a> <a href="https://www.airspaceflightsolutions.com/rotarywingshow" rel="noreferrer noopener nofollow" target="_blank">Rotor Blade LLC </a>– The helicopter utility company that David is chief pilot at. This shot of David shows some of the modifications to the MD500 for powerline work. The large blue strap is the belly band used for Human External Cargo operations. Washing the insulator discs with de-ionised water to remove dirt build up. The helicopter has to come over the wires for the spray boom to reach the inside set. There are lots of videos on YouTube showing close up some of the operations we’ve talked about in this episode. Note the wire strand under the helicopter in this position. No pressure! Do you have a question for David or tips from your own experience? Be part of the conversation by leaving a comment below. The post <a href="https://rotarywingshow.com/91-powerline-davidmccoll/" rel="nofollow" target="_blank">RWS 91 – Helicopter Powerline Operations with David McColl</a> appeared first on <a href="https://rotarywingshow.com" rel="nofollow" target="_blank">The Rotary Wing Show Podcast</a>.

RWS 91 – Helicopter Powerline Operations with David McColl